Skip to main content Skip to search Skip to primary navigation Skip to secondary navigation

Correct installation and on-site checking

Print
Share

Print
Share

High-strength structural bolts can be either snug tightened or fully tensioned. Procedures for both these methods of installation are specified in NZS 3404 (Clauses 15.2.3 to 15.2.5) and it is important that these procedures are followed. It is equally important that the required level of bolt tensioning is specified for each application.

Inspection of bolted connections on site is in accordance with the Steel Structures Standard (NZS 3404). On-site inspection is typically the task of the construction reviewer.

Top

This information is published by the Ministry of Business, Innovation and Employment’s Chief Executive. It is a general guide only and, if used, does not relieve any person of the obligation to consider any matter to which the information relates according to the circumstances of the particular case. Expert advice may be required in specific circumstances. Where this information relates to assisting people:

with compliance with the Building Act, it is published under section 175 of the Building Act
with a Weathertight Services claim, it is published under section 12 of the Weathertight Homes Resolution Services Act 2006.

Print

Print this page (recommended)

Print entire guidance document