Product certificate register

The Cemintel Territory wall cladding system consists of pre-finished, cement-bonded, fibrous wood particle panels in numerous profiles/finishes, the panel dimensions are 3,030 mm by 455 mm with a nominal thickness of 16 mm. Panels are pre-finished using a durable multi-layer paint process and a Nichiguard stain resistant coating.

Panels are tongue and groove profiled along longest edges and fit together to form a waterproof joint. Joints at the ends of the panels are aligned for each panel course and are finished with sealant.

The panels are secured with proprietary components and are installed over a flexible wall underlay or rigid air barrier.

KS1000RW roof and wall panels consist of an external & internal steel sheet liner with a Polyisocyanurate (PIR) core.

The exterior weather sheet liner is nominal 0.5mm thick Zincalume G300S AM100/150 coated steel sheet.

The internal steel sheet liner is nominal 0.4mm thick Zincalume G300S AM100 coated steel.

Matters that should be taken into account in the use or application of the building method or product can be found in item 6. Conditions and Limitations of Use. 

Continuation of description can be found in item 10 – Supporting Information about Description.

Product brochure/catalogue or models identification numbers: 

• KS1000RW 

EcoKrete® is aerated concrete produced through the addition of proprietary foam to a certified concrete mix.

Clelands Timber Weatherboard Cladding consists of LOSP H3.1 or H3.2 or Protim H3.2 treated solid or finger jointed weatherboards of the following profiles:

Bevel Back 

• Standard WB/WBO - sizes 135 x 18mm, 142 x 18mm, 180 x 18mm, 187 x 18mm, 215 x 19mm, 230 x 19mm 
• Rebated WBR- sizes 135 x 18mm 
• Imperial WBB - sizes 140 x 21mm 

Rusticated 

• Standard WR - sizes 135 x 18, 180 x 18mm 
• Wellingtonian WL- sizes 180 x 19mm, 215 x 19mm, 230 x 19mm 
• Hawkes Bay WHB - sizes 135 x 18mm, 180 x 18mm, 215 x 19mm, 230 x 19mm 

Vertical Shiplap 

• Standard WS - sizes 135 x 18mm and 180 x 18mm 

The Cedarscreen Vertical on 45mm Structural Cavity Batten System consists of vertical shiplap weatherboards, horizontal and vertical cavity battens, stainless steel or silicon bronze cladding fixings and powder-coated aluminium flashings. The weatherboards are available in Western Red Cedar, Larch and Truwood, and with a Band Sawn Face, Dressed Face or Dressed Faced Sanded finish. Larch and Truwood weatherboards are supplied with a factory applied oil finish.

The Cedarscreen Horizontally Fixed Wall Cladding System comprises of horizontal bevel back or rusticated weatherboards direct fixed or cavity fixed on vertical cavity battens, stainless steel or silicon bronze cladding fixings and powder-coated aluminium flashings. The weatherboards are available in Western Red Cedar, Larch and Truwood, and with a Band Sawn Face, Dressed Face or Dressed Faced Sanded finish. Larch and Truwood weatherboards are supplied with a factory applied oil finish.

The Cedarscreen Vertical on 20mm Cavity Batten System consists of vertical shiplap weatherboards, horizontal and vertical cavity battens, stainless steel or silicon bronze cladding fixings and powder-coated aluminium flashings. The weatherboards are available in Western Red Cedar, Larch and Truwood, and with a Band Sawn Face, Dressed Face or Dressed Faced Sanded finish. Larch and Truwood weatherboards are supplied with a factory applied oil finishd wood oil.

The Hermpac VertiLine Vertical Shiplap Weatherboard Cavity System consists of vertically fixed shiplap weatherboards, ventilated cavity battens, flashings and accessories

The Nichiha EX Series wall cladding system consists of pre-finished, cement-bonded, fibrous wood particle panels in numerous profiles/finishes, the panel dimensions are 3,030 mm by 455 mm with a nominal thickness of 16 mm. Panels are pre-finished using a durable multi-layer paint process and a Nichiguard stain resistant coating.

Panels are tongue and groove profiled along longest edges and fit together to form a waterproof joint. Joints at the ends of the panels are aligned for each panel course and are finished with sealant.

The panels are secured with proprietary components and are installed over a flexible wall underlay or rigid air barrier.

Thermakraft Covertek 405 Roof and Wall Underlay is a synthetic, fire retardant, absorbent, breathable building underlay for use under roof and wall claddings. The product consists of a micro-porous water-resistant film laminated between two layers of non-woven spun-bonded polyolefin. Thermakraft Covertek 405 Roof and Wall Underlay is coloured white on the top and bottom faces with yellow Covertek 405 branding on the exposed face.