Product certificate register

Thermakraft Covertek 403 Roof and Wall Underlay is a synthetic, fire retardant, absorbent, breathable building underlay for use under roof and wall claddings. The product consists of a micro-porous water resistant film ultrasonically bonded between two layers of non woven spun-bonded polyolefin. Thermakraft Covertek 403 Roof and Wall Underlay is coloured white on the top and bottom faces with green Covertek 403 branding on the exposed face. 

IBS EUROFloor is a multi-layered Oriented Strand Board produced in sheets 2400x1200x20mm and 3600x1200x20mm sheets, tongue and grooved with a plastic tongue along one edge of the board

IWD Floorboard is structural grade particleboard flooring. Sheets are manufactured with a groove along each long edge and plastic tongue inserted into the groove along one of the edges. The ends of the sheets are square edged. The sheets are marked with the thickness of the board on the underside.

Orange tongue is 19 mm and intended for use in domestic and some commercial buildings, designed for both platform and fitted flooring construction methods.

Burgundy Tongue is 22mm thick to allow for maximum joist centre span of 600mm.

IWD Floorboard is available in the following sheet sizes:

• 3600mmx900mmx19mm Orange plastic tongue 
• 3600mmx800mmx22mm Burgundy plastic tongue 

ProctorPassive SmartVap 100 is a two-layer spun-bonded polyolefin membrane. It is an air barrier and variable vapour diffusion resistance retarder. It is white with green and blue printing, and supplied in rolls 1.5m x 30m.

IBS RigidRAP® is an 8mm OSB panel product faced with a laminated synthetic building wrap.

saveBOARD internal lining is a panel product manufactured from shredded and compressed composite packaging. The panels are supplied in two face finishes, paper-faced and exposed. The paper-faced panel has a recycled paper on the finished face while the exposed has a clear LDPE plastic transparent film on the finished face.

Both boards are 1200 mm in width and supplied in two thicknesses: 10 mm and 12 mm; and three lengths: 2400 mm, 2700 mm and 3000 mm. 

The paper-faced panel may be painted and wallpapered. The exposed panel is designed to be left in its natural state and requires no other finishing.

Bayonet BayoWrap Wall Underlay is manufactured from micro-porous water-resistant film laminated to two layers of non-woven spun-bonded polypropylene and is coloured white. 

The product is supplied in rolls 1.37 m wide x 36.5 and 73 m long and 2.74 m wide x 18.5 and 36.5 m long. The product is printed with the Bayonet logo repeated along the length of the roll. 

IBS RigidRAP®-XT is an 8mm OSB panel product faced with a laminated synthetic building wrap and with 10mm lightweight rigid foam on the rear of the panel.

ALPOLIC™ NC is a 4.0mm thick aluminium composite material (ACM*). It has a 3.0mm non‐combustible mineral core, sandwiched between two skins of 0.5mm thick aluminium metal facings.

The topside surface is finished with Lumiflon™ based fluoropolymer coating as standard, and the backside is finished with a thin polyester coating (wash coating) or a service coating. 

The certificate covers the design (engineering design and specification of lift componentry) and construction (manufacture and installation) of the following Schindler lift models; 2400, 2500, 2600, 3000, 3300, 5000, 5500 and 6000. It is referred to as the Schindler “methodology”.