Product certificate register

CSR Hebel® PowerPanel50 and CSR Hebel® PowerPanelXL are lightweight steel-reinforced Autoclaved Aerated Concrete (AAC) panels mounted vertically on cavity battens, screw fixed to the structural framing. PowerPanelXL is 75mm thick and PowerPanel50 is 50mm thick. The panels have square edges and are manufactured in a range of stock sizes.

CSR Hebel® PowerFloor System comprises of:

• lightweight steel reinforced autoclaved aerated concrete (AAC) panel installed over steel or timber floor joist system forming a platform floor
• Winstone Wallboards GIB®
• 90mm ceiling batts with thermal resistance R1.8.

CSR Hebel® PowerFloor panels are 75mm thick reinforced with corrosion-protected steel mesh and have tongue and groove edges

Masons UNI® and UNI® PLUS Flexible Air Barriers are tri-laminate synthetic sheets 2.74 metres wide consisting of two outer non-woven layers and a middle synthetic membrane which is dark grey.

UNI® Flexible Air Barrier has a blue front face marked "UNI® Flexible Air Barrier" and a black rear face.

UNI® PLUS Flexible Air Barrier has a blue front face marked "UNI® PLUS Flexible Air Barrier" and a white rear face.

UNI® Flexible Air Barrier is also available as 600 mm wide sheet with a self-adhesive strip, marketed as UNI® Soffit.

KalsiCTU is a 6mm thick autoclaved cellulose fibre-reinforced cement sheet available in the following sizes: 900mm (w) x 1200mm and 1800mm (l).

KalsiWAB is a 9mm thick autoclaved cellulose fibre-reinforced cement sheet available in the following sizes: 1200 mm (w) x 2400 mm, 2700 mm and 3000mm (l).

KalsiGroove is an autoclaved cellulose fibre-reinforced cement sheet 7.5mm thick with a 2.5mm deep, 5 mm wide V-shaped groove at 100 mm centers along the sheet length. Sheets are 1200 mm (w) x 2400mm or 2700mm (l).

KalsiFlex is an autoclaved cellulose fibre-reinforced cement sheet available in
1200mm (w) x 2400mm – 3000mm (l) (Refer Technical literature for details).

The CEDRAL Sidings (Lap / Click) Facade systems consists of CEDRAL Cladding panels in 2 profiles (Lap and Click) and 2 finishes (smooth and timber) and in a wide range of colours.

CEDRAL Lap is installed in a traditional lapped style while CEDRAL Click is installed as a tongue and groove cladding system. CEDRAL Lap/Click planks are fixed to either timber batten or metal cladding support frame with CEDRAL proprietary fixings or clips and a range of proprietary flashing and starter profiles. CEDRAL Lap may be installed in horizontal, vertical or undulated format.

Similarly, CEDRAL Click may be installed in horizontal and vertical orientation. CEDRAL Lap/Click may be installed with either a flexible (pliable) or rigid weather barrier.

Kooltherm® K17 Insulated Plasterboard is a fibre-free rigid thermoset phenolic insulation, sandwiched between a front facing of tapered edge gypsum based plasterboard, and a reverse tissue based facing, autohesively bonded to the insulation core.

SOLITEX EXTASANA® Wall Underlay is a flexible synthetic absorbent wall underlay. The product consists of a monolithic water-resistant film laminated between two layers of non-woven spun-bonded polypropylene and is coloured blue on the top surface and grey on the bottom surface.

Oblique^TM Weatherboard Cladding is a cavity-based fibre cement weatherboard wall cladding system.

Oblique^TMWeatherboard Cladding consists of ObliqueTM Weatherboard, which is a 14mm profile fibre cement weatherboard, fixed horizontally or vertically over battens to form a nominal 20 mm cavity.

Proprietary ventilated timber battens are used in the vertical application. The cladding is finished with a latex paint system.

The cladding system incorporates a primary and secondary means of weather resistance (first and second lines of defence) against water penetration by separating the cladding from the external wall framing with a nominal 20 mm cavity. The cavity allows for any occasional ingress of water that may get past the external skin to drain to the exterior of the building, and any remaining moisture to dry by evaporation.

DuPont Tyvek® HomeWrap® is a non-woven, water resistant, flammability-rated breathable 62 gsm synthetic wall underlay. It is white with red and blue printing "DuPont Tyvek HomeWrap®" and is available in 30 m long rolls 2.74m and 3.048m wide.

• PRIMAflex – A smooth flat autoclaved cellulose fibre reinforced cement sheet with square edges.
• PRIMAplank – An autoclaved cellulose fibre reinforced cement siding board. Available in smooth, woodgrain & cedar profiles.
• PRIMAbase – An Autoclaved cellulose fibre reinforced cement sheet rebated on 3 sides for seamless jointing and as a substrate for texture coating.
• PRIMAalpha WeatherClad – An autoclaved smooth cellulose fibre cement cladding. Pre-primed featuring tongue & groove jointing system at the width & bevelled top edge at the back surface.